Hartan LITE Manuel D'instructions page 23

All manuals and user guides at all-guides.com
WARNING!
Do not use mattresses that have more than 2cm in depth.
WARNING!
This carrycot is suitable for holding only one baby, which cannot
yet sit up on its own, or roll on its side or support itself on hands
and knees. Maximum baby weight: 9 kg.
WARNING!
Never place this carrycot on a stand. Always place the carrycot
on a solid, horizontal base.
WARNING!
Do not use the carrycot if any part is torn or broken. Check the
handles and the base regularly for signs of wear or damage.
WARNING!
Be aware of the risks posed by open fires or other sources
of heat, such as electric heaters, gas flames etc., if these
are in the immediate vicinity of the carrycot.
Carry cot attachment
1. Take the stroller unit off the chassis.
2. Place the carrycot on the chassis in a way that the two lateral lock pins engage
in the slots 16 of the fixing frame.
3. Push the carry cot right up to the stop. The catching pins on both sides
engage automatically, which is indicated by a click sound.
WARNING!
securely! If the red safety point on the side can still be seen, the unit lock has
not yet completely closed.
4. Pull the two locking levers downwards until they snap into place to open the lock
and to remove the carry cot unit.
5. Fold the retaining brackets 22 towards the bottom when taking the carrycot
along, or putting it down.
By pulling the carry cot, check before use whether it is fixed
Instructions for use
Retaining bracket 22
Lock pin 16
Lock lever
19