Tunturi Platinum Cross sprinter Mode D'emploi page 6

Step 3: Console
1. Assemble the transport wheels (66) with the two
5/16" x 1-3/4" bolts (38) and 5/16" nuts (39)
2. Unpack the console and install the 3 AA batteries.
Connect the speed sensor wire into the white two pin
connector accessed through the opening in the back
of the console. Mount the console onto the console
plate and secure with four M5 x 10mm screws (51).
3. Secure the two bottleholders (75) to the upright tube
with four M5 x 10mm screws (51)
4. Snap the four end caps (73) onto the cup washers on
the left & right pedal tube assemblies.
3.
English
6
All manuals and user guides at all-guides.com