Care & Maintenance; How To Clean; Resetting The Motor Thermostat - Ninja BL660C Manuel Du Propriétaire

Care & Maintenance

HOW TO CLEAN

CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1
Separate/remove all parts from each other.
2
Hand Washing: Wash the lids, pitcher, Nutri Ninja
and blade assemblies in warm, soapy water. When
washing the blade assemblies, use a dish-washing
utensil with a handle to avoid direct hand contact with
blades. Handle blade assemblies with care to avoid
contact with sharp edges. Rinse and air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies
and attachments are all dishwasher safe. The lids
and blade assemblies are top rack dishwasher safe.
Ensure that the blade assemblies and cutting discs
are removed from the containers before placing in
the dishwasher.
WARNING: Handle the Stacked Blade Assembly
and Nutri Ninja Blade Assembly with care when
washing, as the blades are sharp. Contact with
the blades' edges can result in laceration.
3
Wipe the motor base clean with a damp cloth.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
13 1-877-646-5288
HOW TO STORE
1 Store the Ninja
blade assembly inside the corresponding container
with the lid secured on top. Do not place anything
on top. Store the rest of the attachments in a safe
place where they will not be damaged and won't
cause harm. Insert the power cord into the cord
storage area located in the back of the motor base.
cups
™ NOTE: Do not store blended or unblended
ingredients in the Nutri Ninja Cup with the
blade assembly attached.
Cord Storage

RESETTING THE MOTOR THERMOSTAT

The Ninja Professional Blender features a unique safety
system which prevents damage to the unit's motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will
stop. Allow the appliance to cool for approximately
15 minutes. To reset the appliance, follow the resetting
procedure below:
1
Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the blade assemblies.
3 Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
Professional Blender upright with the
®