Nvidia QUADRO GV100 Guide Rapide page 5

EN
6
Install the card into the primary x16 PCI slot. Press gently on
the card until it is seated securely in the slot.
7
Secure the card to the system frame using the screw(s)
removed in step 5.
8
Connect the supplied auxiliary power cable(s) from the
power supply to the back edge of the GPU.
9
Install the side panel removed in step 4.
Page 4 | Quadro GV100 Quick Start Guide
All manuals and user guides at all-guides.com
Note: Use the recommended power connector guidelines at
www.nvidia.com/quadropowerguidelines.
Install the graphics card into
the primary x16 PCI slot.
The Quadro GV100 is a dual-slot
GPU and will cover the adjacent
slot.
Use the 8-pin to dual 6-pin
auxiliary cable, if the power
supply does not have an 8-pin
auxiliary cable. Connecting
a single 6-pin auxiliary cable
directly to the GV100 is not
recommended.