Optika B-1000 Manuel D'instructions page 12

4.0 MAINTENANCE
4.1 Always think about
- The following environment is required:
Indoor temperature: 0-40°C; Maximum relative humidity: 85 % (non condensing).
- Keep the microscope away from dust and shocks while in use.
- Turn off the light immediately after use.
- Use a soft lens tissue to clean the optics after use.
- Only if needed, use a cloth moistened with water and a mild detergent, rinsing with water and drying
immediately with a lint-free cloth.
- After use, cover the microscope with the included dust-cover, and keep it in a dry and clean place.
4.2 Do not!
- Wipe the surface of any optical items with your hands. Fingerprints can damage the optics.
- Use solvents, neither on the microscope, nor on the optics.
- Disassemble objective or eyepieces to attempt to clean them.
- Mishandle or impose unnecessary force on the microscope.
- Clean the unit with volatile solvents or abrasive cleaners.
- Attempt to service the microscope yourself.
B-1000: the high-efficiency white LED source in B-1000 is designed to last many years without any
performance decrease. Never try to replace it with another kind of LED source. In case of malfunctio-
ning contact OPTIKA service.
4.3 If you need to send the microscope to Optika for maintenance, please use the original packaging.
All manuals and user guides at all-guides.com
Page 12