Samsung HW-H750 Manuel D'utilisation page 9

REMOTE CONTROL
REMOTE CONTROL BUTTONS AND FUNCTIONS
● Soundbar is a Samsung proprietary name.
● Operate the TV using the TV's remote control.
All manuals and user guides at all-guides.com
SOURCE
Press to select a source connected to the Soundbar.
MUTE
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
REPEAT
Press to set the REPEAT function during music playback from a USB
device.
REPEAT OFF : Cancels Repeat Playback.
REPEAT FILE : Repeatedly play a track.
REPEAT ALL : Repeatedly play all tracks.
REPEAT RANDOM : Plays tracks in random order. (A track that has
already been played may be played again.)
Skip Forward
If there is more than one file on the device you are playing, and you press
the $ button, the next file is selected.
AUDIO SYNC
If the Soundbar is connected to a digital TV and the video appears out of
sync with the audio, press the AUDIO SYNC buttons to sync the audio
with the video. Use the #,$ buttons to set the audio delay between 0
ms and 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync
function may not work.
You can also activate Wi-Fi SETUP function by pressing and holding
AUDIO SYNC button on the remote for over 7 seconds.
DIMMER/Anynet+
DIMMER : Press the DIMMER/Anynet+ button to control the brightness
of the VACUUM TUBE AMP. DIMMER does not function for 30 seconds
after you turn on the product for the very first time.
Anynet+ : Press and hold the DIMMER/Anynet+ button for more than
5 seconds to turn the Anynet+ function and AUTO POWER LINK function
on or off. The Anynet+ function lets you control the Soundbar with the
remote from an Anynet+ compatible Samsung TV. The Soundbar must be
connected to the TV via an HDMI cable. See page 23 for details about
AUTO POWER LINK.
TREBLE BASS
Press to select Treble or Bass. Then, use the #,$ button to adjust the
Treble or Bass volume from -3 to +3.
9
REMOTE CONTROL