Publicité
WIRING, CONTINUED,
5. (GTD OPTION)
For use with generator system.
See Figure 7.
At GTD Enclosure Access Plate:
a. BLUE wire – Normal power, switched
b. BLACK wire – Normal power, unswitched
c. WHITE wire – Normal power neutral
d. RED wire – Emergency power
e. RED/WHITE wire – Emergency power common
MOUNTING:
NOTE: Refrain from bending the T-Grid clips multiple times prior to installation to prevent damage to clip.
1) For mounting to T-Grid structure:
a. Place the fixture in the appropriate T-Grid ceiling structure. See Figure 8.
b. From above ceiling, bend the attached T-Grid clips over the T-Grid ceiling on all 4 corners to secure the fixture to the T-
Grid. See Figure 9.
2) For suspension mounting (or additional T-Grid support):
a. Use hanger wire holes at all 4 corners and appropriately rated hanging cables (not included) to suspend fixture.
See figure 10.
FIG. 8: CEILING INSTALLATION
www.lithonia.com I 800-705-SERV (7378) I
We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
:
TechSupport-CommercialIndoor@AcuityBrands.com
CPXTW LED INSTALLATION INSTRUCTIONS
FIG 7: GTD WIRING DIAGRAM
T-Grid
FIG. 9: T-GRID MOUNTING
I © 2023 Acuity Brands Lighting, Inc. All Rights Reserved.
Bend out hook to
Engage T-Grid
Secure suspension/aircraft
cable through hole in clip
FIG. 10: SUSPENSION MOUNING
5 of 7
Publicité
