Battery Replacement; Remote Control; Collar - Martin System Tiny Trainer TT200 Mode D'emploi

All manuals and user guides at all-guides.com
eN
To change the program, hold your finger on the «on/off-key» on the
remote. The LCD screen will display first a buzzer-symbol to indicate the
«simultaneous sound and stimulation» program ; then a buzzer with
an eggtimer-symbol to indicate the «sound warning» program; then no
symbol at all, to indicate the «impulse without sound» mode.
To use the «only sound» mode, select level 0 on the remote.

2. bATTerY repLACeMeNT

When the LED flickers red on the collar, or when the system doesn't func-
tion correctly (decreased range, no stimulation...), replace the batteries.

2.1 remote control

Take off the cover by pushing with your thumb on the marked spot, and
slide it downwards. Extract the battery from the remote control by sliding
downwards. Enter a new battery respecting the polarities (+ upwards).
Clip the cover in the remote again. Use only CR2430 lithium 3V batteries.

2.2 Collar

Unscrew the cover on the front side of the collar with a coin. Let the bat-
tery slip out by softly inclining the collar. Enter a new battery respecting
polarities (+ externally). Screw the cover pushing on the tight junction.
The collar switches on automatically when the cover is screwed. Use only
CR2 3V lithium batteries
17