NEXT BASE Click&Go Lite Serie Manuel D'instructions page 10

TURNING ON THE PLAYER
„ Home Use
1. Connect the included AC/DC adaptor to the main outlet.
2. Connect the DC output plug of the adaptor to the DC input jack of the
unit.
„ In-Car Use
1. Slide the DVD player on to the Stanchion Mount, make sure that power is
being supplied from the car cigarette lighter connection.
Once the DVD player is connected to power, the DVD player will turn ON automatically.
Note: The included AC/DC adaptor is compatible with voltage from 100V to 240V. You can use it overseas, and a
converter plug may be used to fit into the region in which you are traveling.
TURNING OFF THE PLAYER
1. Press OFF / on the unit for about 2 seconds.
2. Unplug the adaptor from a socket.
3. Disconnect the DC output plug from the DC input jack.
Note: When the player or monitor is not used for around 5 minutes, the player or monitor will turn off automatically.
LOADING AND PLAYING DISC
1. Press the OPEN
2. Open the disc cover.
3. Insert a disc. You can hear a distinctive click as the disc locates correctly.
4. Close the disc cover. The playback will start automatically.
1
SHARING SCREENS (Duo and Duo Deluxe only)
Install the 2 screens on the Stanchion Mounts as this transfers the picture and sound also. For the Duo model, the
picture and sound of player transfer to the monitor automatically.
For the Duo Deluxe model, select "MODE" and "AV Click&Go INPUT" on the designated Slave screen, whilst the
movie is already playing in the Master unit.
08
All manuals and user guides at all-guides.com
button on the Player to open the display panel.
2 3