Publicité
10
www.raider.bg
EN
Original instructions' manual
Congratulations on the purchase of machinery from the fastest growing brand of electric and pneumatic tools - RAIDER. When
properly installed and operating, RAIDER are safe and reliable machines and work with them will deliver a real pleasure. For your
convenience has been built and excellent service network of 45 service station across the country.
Before using this machine, please carefully acquainted with these "instructions for use.
In the interest of your safety and to ensure proper use and read these instructions carefully, including the recommendations
and warnings in them. To avoid unnecessary errors and accidents, it is important that these instructions will remain available for
future reference to all who will use the machine. If you sell it to a new owner "Instructions for Use" must be submitted along with
it to enable new users to become familiar with relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of the trademark RAIDER.
Adress: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel 02 934 33 33, 934 10 10, www.raider.bg; www.euromasterbg.
com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope of certification: Trade,
import, export and servicing of hobby and professional electrical, mechanical and pneumatic tools and general hardware. The
certificate was issued by Moody International Certification Ltd, England.
parameter
Units of measurement
Model
-
Cordless Impact Driver
Rated voltage
V DC
Blows per minute
min-
1
Hex Bit Drive
inch
Sound pressure level LpA
dB(А)
Sound power level LwA
dB(А)
Vibration emission value ah
m/s2
1. General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire and / or severe injuries.
Keep these instructions in a safe place.
1.1. Safety in the workplace.
1.1.1. Keep your workplace clean and well lit. Disarray and poor lighting may contribute to
the occurrence of an accident.
1.1.2. Do not operate in an environment where the impact Driver with an increased risk of an explosion in the vicinity of flammable
liquids, gases or powders.
During operation of the impact Driver can be separated sparks that can ignite powders or
fumes.
1.1.3. Keep children and bystanders at a safe distance while working with the impact Driver. If your attention is diverted, you may
lose control over the impact Driver.
1.2. Safety when working with electricity.
1.2.1. Protect your impact Driver from rain and moisture. Penetration of water into the impact Driver increases the risk of electric
shock.
1.3. Safe way of working.
1.3.1. Be concentrated, watch their actions carefully and act cautiously and prudently. Do not use the impact Driver, when you are
tired or under the influence of drugs, alcohol or
narcotic drugs. A moment of distraction at work striking impact Driver may have the effect of extremely serious injuries.
Dear Customer,
TECHNICAL DATA
value
RDP-SBES20
20
0-4400
1/4
98, K = 3
109, K = 3
11,51, K = 1.5
1.3.2. Work with protective work clothing and always with safety glasses.
Wearing Suitable for drilling shock and the activities of personal protective equipment, such
as respiratory masks, healthy, tightly closed shoes grapple with a stable, protective helmet and
silencers (hearing protectors), reduces the risk of accident.
1.3.3. Avoid the danger of switch on the impact Driver inadvertently. If, when you carry the
impact Driver, keep your finger on the trigger switch, there is the risk of accident.
1.3.4. Avoid unnatural positions of the body. Work in a stable position of the body at any
time and keep the balance. So you can control the impact Driver better and safer if unexpected
situations arise.
1.3.5. Work with appropriate clothing. Do not operate with loose clothing or ornaments.
Keep your hair, clothes and gloves at a safe distance from rotating units of the impact Driver.
Robes, jewelry, long hair can be caught and carried away by chuck.
1.4. Care to impact Driver.
1.4.1. Keep impact Driver in places where they could not be reached by children. Do not let it be used by persons who are not
familiar with how to work with it and have not read those instructions. When in the hands of inexperienced users, the impact Driver
can be dangerous.
1.4.2. Keep your impact Driver carefully. Check whether the mobile units operate impeccable, whether it jamming, if there is
broken or damaged item which distort or alter the functions of the impact Driver. Before using the impact Driver, make sure that
the damaged parts to be repaired. Many accidents are caused by poorly maintained power tools and appliances.
1.4.4. Keep your cutting tools well sharpened and always clean. Properly maintained cutting tools with sharp edges have less
resistance and working with them easier.
1.4.5. Use the impact Driver, attachment, working tools, etc., according to the manufacturer's instructions. In doing so must comply
with specific operating conditions and operations to perform. Using a impact Driver than those provided by the manufacturer
applications increases the risk of accidents.
1.5. Instructions for safe handling, specific for your purchased impact Driver. Loss of control over power tool could lead to the
occurrence of accidents.
1.5.1. Do not use additional devices which are not recommended by the manufacturer for this particular power tool. The fact that
you can attach to specified device or machine working
tool does not ensure safe working with him.
1.5.2. Never put your hands near the rotary working tools.
1.5.3. If you perform activities which threaten to fall working tool of hidden wires under tension, hold power tool only electric
insulated handles. When entering the working tool in contact with the wires under tension, it is transmitted through the metal
details of the impact Driver and this may lead to electric shock.
1.5.4. Use appropriate instruments to find any hidden beneath the surface pipelines, or contact the appropriate local supply
company. Into contact with the wires under tension can cause fire or electric shock. Pipeline damage can lead to explosion.
Deterioration of water has the effect of major material damage and may cause electric shock.
1.5.5. Provide workpiece.
Detail, and attach with appropriate appliances or braces is anchored more firmly and securely
than if you hold it by hand.
1.5.6. Regularly clean your vent impact Driver.
1.5.7. Use only recommended battery and charger.
1.5.8. Do not change direction of spindle rotation when the tool is operating. Otherwise impact Driver may be damaged.
1.5.9. To clean the impact Driver use soft, dry cloth. Never use detergents or alcohol.
2. Construction and use.
The cordless screwdriver is a power tool equipped with a brushless motor. The electric screwdriver is a hand-held power tool
that is widely used to screw and unscrew screws into plasterboard, wood, wood paneling, wood-like materials, metal and facade
cladding.
Fast and accurate mounting with optimum torque matching and torque, standard cornering on fixed parts with easy-to-use one-
stop deep limiter and precise clutch release.
The screwdriver can be used with extensions for nozzles and nozzles of various lengths and hexagonal sections of 1/4 "size. To
use the automatic screwdriver, you need to work with 25mm nozzles. The use of the power tool for activities other than its intended
use is not permitted.
Cordless, cordless power tools are especially suitable for interior decoration, room fitting and more.
The use of the power tool is not permitted for activities other than its intended use!3. Battery and charger information.
The machine is supplied without a battery and charger. Use only battery and charger from the R20 System series.
11
Publicité
