Télécharger Imprimer la page

Honeywell AQ1000TP2 Guide Du Propriétaire page 25

Publicité

Les langues disponibles

Les langues disponibles

Vacancy Heating Setpoint
This parameter is the heating setpoint when the thermostat is in Vacancy mode (see
page 4).
Default setting
Range
Vacancy Cooling Setpoint
This parameter is the cooling setpoint when the thermostat is in Vacancy mode (see
page 4).
Default setting
Range
Minimum Floor Limit
This parameter is available only if the thermostat is configured in AF mode (see page 19). Heating
is activated, regardless of setpoint, if the floor temperature is equal to this setting or below.
Default setting
Range
Maximum Floor Limit
This parameter is available only if the thermostat is configured in AF mode (see page 19). Heating
is disabled, regardless of setpoint, if the floor temperature is equal to this setting or above.
Default setting
Range
41 °F (5 °C)
between the minimum and maximum setpoints
81 °F (27 °C)
between the minimum and maximum setpoints
41 °F (5 °C)
41 °F (5 °C) to 100 °F (38 °C)
100 °F (38 °C)
41 °F (5 °C) to 100 °F (38 °C)
22
69-2245EF

Publicité

loading