Publicité
Les langues disponibles
Les langues disponibles
Removing the cover
1.
Locate two cover screws.
3.
Pull the cover.
5.
Lift the expansion card lock to
a 90º-100º angle.
Removing the front panel assembly
1.
Locate the front panel
assembly hooks.
4 4 4 4 4
2.
Remove the cover screws.
4.
Lift the cover, then set aside.
6.
Lift the chassis support
bracket, then remove.
2.
Pull the hooks outward to
remove.
Q u i c k I n s t a l l a t i o n G u i d e
Q u i c k I n s t a l l a t i o n G u i d e
Q u i c k I n s t a l l a t i o n G u i d e
Q u i c k I n s t a l l a t i o n G u i d e
Q u i c k I n s t a l l a t i o n G u i d e
Publicité
