Publicité
Les langues disponibles
Les langues disponibles
OPERATION
CAUTION:
•
Select a suitable location for the fan. Always choose a safe
location in accordance to the safety recommendations outlined.
•
When placing a fan on a table or shelf, always ensure that the
power cord does not hang where it can accidentally be pulled
and that the unit cannot accidentally fall.
•
Do not hang or mount the fan on a wall or ceiling.
•
Remove the cable tie and unravel the cord set before operation.
•
To blow air in one direction and stop oscillation, allow the Desk
Fan to move into the desired position and pull the oscillating
knob(7) up. To return to a normal oscillating function, press the
oscillating knob(7) down.
1. On / Off and Speed Control
The ON/OFF and Speed is controlled by
the rotated Switch(8).
0-The Fan is switched Off， 1- at the lowest
speed，2-at the middle speed，3-at the
highest speed
2. Angle Adjustment
Switch off the fan. Adjust the fan to the desired angle by hand.
3. Oscillation control
The fan can be set to oscillate by pushing Oscillating Knob
downwards. To stop the oscillating feature, pull-up the Oscillation
Knob(7).
4. 2 in 1 function
The fan can be transformed from stand fan to table fan by removing
the upper tube(11). Then Slide the Switch Box down over the Lower
7
Publicité
