Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Fig.4
Fig.5
Fig.6
Fig.7
If the temperature selected by the user during
programming exceeds 93°C, the SLOW FLAME
function will not be accepted: the maximum
admitted temperature in slow flame running (93°)
will flash on the display, alternative display of 3
horizontal dashes (---) and after a few seconds,
will automatically disable the SLOW FLAME
function (Fig.5-6).
If the SLOW FLAME function is enabled before
programming of the semi-automatic cycle, upon
programming
the
temperatures automatically reduces to between
30 and 93°C.
By activating the SLOW FLAME function the
heating times may extend: this is normal and
does not constitute an anomaly.
At any moment, to restore the bain-marie fluid
(glycol) at the temperature of 120°, press the
SLOW FLAME key again and verify the LED is off
(Fig.7).
range
of
selectable
ENGLISH - 28
Publicité
Table des Matières
Dépannage
