Publicité
Liens rapides
NOTE:
Please consult a qualified electrician if you are not certain of the installation.
CAUTION:
Before starting the installation, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.
1.
Pull the power supply wires out from the post and the fixture wires out from the fixture body,and attach the
wires tighter by connecting black to black and white to white. Cover connection using wire connector.
Attached the power supply ground wire to the fixture ground wire.
2.
Secure the fixture body to the post using the wood screws provided.
Install the bulb (No included).
3.
4.
Place the glasses and attach into fixture body. Using the head screw screwing the top cover onto fixture
body.
5.
Turn on the power.
ASSEMBLY INSTRUCTION
SKU#60/546/547/548
A Satco Product
Publicité
Manuels Connexes pour Satco Nuvo 60/546
Sommaire des Matières pour Satco Nuvo 60/546
- Page 1 Secure the fixture body to the post using the wood screws provided. Install the bulb (No included). Place the glasses and attach into fixture body. Using the head screw screwing the top cover onto fixture body. Turn on the power. A Satco Product...
- Page 2 INSTRUCTIONS DE MONTAGE SKU#60/546/547/548 REMARQUE : Si vous avez des incertitudes quant à l'installation, demandez de l'aide à un électricien qualifié. ATTENTION : Avant de commencer l'installation, déconnectez l'alimentation électrique avec le disjoncteur ou en retirant le fusible du disjoncteur. 1.