Virutex LR284R Mode D'emploi page 6

by VIRUTEX technical service.
10. LUBRICATION AND CLEANING
The machine is shipped from factory completely lubri-
cated and does not require special care over the course
of its useful life. It is important to clean the machine
carefully after each use with a blast of dry air.
Keep the feed cable in perfect condition.
Keep all of the machine's ventilation and cooling ope-
nings clean and free from obstruction.
11. NOISE LEVEL AND VIBRATIONS
The noise and vibration levels of this electric tool
have been measured according to European standard
EN50144.
The noise level in the workplace may exceed 85 dB(A),
in which case the user must take noise protection
precautions.
12. WARRANTY
All VIRUTEX power tools are guaranteed for 12 months
from the date of purchase, excluding any damage which
is a result of incorrect use or of natural wear and tear
on the machine. All repairs should be carried out by the
official VIRUTEX technical assistance service.
13. RECYCLING ELECTRICAL EQUIPMENT
Never dispose of electrical equipment with domestic was-
te. Recycle equipment, accessories and packaging in ways
that minimise any adverse effect on the environment.
Comply with the current regulations in your country.
Applicable in the European Union and in European
countries with selective waste collection systems:
If this symbol appears on the product or in the accom-
panying information, at the end of the product's useful
life it must not be disposed of with other domestic waste.
In accordance with European Directive 2002/96/EC, users
may contact the establishment where they purchased the
product or the relevant local authority to find out where
and how they can take the product for environmentally
friendly and safe recycling.
VIRUTEX reserves the right to modify its products
without prior notice.
6
F R A N Ç A I S
PONCEUSE VIBRANTE LR284R
1. CARACTÉRISTIQUES TECHNIQUES
Moteur Universel.............................................50-60 Hz
Puissance...........................................................180 W
Vitesse.....................................................12500 min
Rotation..............................................................25000
Diamètre orbite.....................................................2 mm
Surface de ponçage.....................................93x185 mm
Niveau de pression acoustique
continu équivalent pondéré............................81 dB(A)
Niveau de puissance acoustique...................104 dB(A)
Niveau de vibrations (main-bras) habituel.........<2,5 m/s
Poids..................................................................1,5 Kg
2. UTILISATION
PONCEUSE VIBRANTE: Ponceuse qui s'utilise d'une
seule main destinée à la finition de surfaces sèches.
Dotée d'une forte puissance d'aspiration des poussières
produites par le ponçage.
En vue d'obtenir une bonne qualité de finition, vous
devez faire glisser la machine sur la surface à traiter, en
procédant par mouvements elliptiques répétitifs, ce qui
évite ainsi la formation de rayures sur la surface à poncer.
Pour atteindre le degré de finition souhaité, le ponçage
s'effectuera par passages successifs, en utilisant du papier
abrasif muni de grains de plus en plus fins.
3. ÉQUIPEMENT STANDARD
Vous trouverez les éléments suivants à l'intérieur de
la boîte:
- Ponceuse vibrante LR284R
- Ensemble sac aspiration.
- Manuel d'utilisation et documentation diverse.
- 1 feuille de papier abrasif pour base mobile.
4. ACCESSOIRES
En option:
- Base velcro 8499219
- Centreur papier abrasif 8445571
- Kit d'aspiration standard 6446073.
5. CONSIGNES DE SÉCURITÉ POUR
LE MANIEMENT DE LA MACHINE
Avant toute utilisation des ponceuses,
lisez attentivement la NOTICE SUR LES
CONSIGNES DE SÉCURITÉ jointe à la
documentation de la machine.
-1
2