Repeat Playback; A-B Repeat Playback - Teac SR-100i Mode D'emploi

CD USB
Each time the Repeat (
is changed as follows:
REP ONE
REP ALB
(MP3/WMA disc/USB storage device
only)
REP ALL
REP OFF
(Repeat off)
REP ONE (Repeat one)
During playback, press the Repeat (
"REP ONE" appears on the display.
The track being played will be played repeatedly.
REP ALB (Repeat folder)
(MP3/WMA disc/USB storage device only)
Press the Repeat ( ) button twice.
"REP ALB" appears on the display and all the tracks in
the folder will be played repeatedly.
REP ALL (Repeat all)
Press the Repeat ( ) button twice (or three times for
MP3/WMA files).
"REP ALL" appears on the display and all the tracks will
be played repeatedly.
During programmed playback, the programmed tracks
will be played repeatedly.
26

Repeat Playback

) button is pressed, the mode
) button once.

A-B repeat playback

This function allows repeat playback of any desired section
of the track/file.
1
During playback, designate the point at which
repeat playback should start by pressing the
A-B button.
"A-" appears on the display.
2
When the point at which repeat playback
should end is reached, press the A-B button
again.
The designated section will be played back
repeatedly.
< To return to normal play, press the A-B button or the
Stop (H) button.
< There must be more than 3 seconds between A and
B.
< The starting point and the end point must be in a
same track/file. If the file/track changes after you set
the starting point, the A-B repeat playback mode will
be cancelled.