Basic Operation - Teac SR-100i Mode D'emploi

iPod CD USB
This chapter describes the basic operation which is
available in every mode.
1
Press the Standby/On (
unit on.
< The unit turns on with the source that was last
selected.
2
Press the FUNCTION button (same as the
Standby/On button) repeatedly to select a
source.
The source changes as follows:
< To listen to an external component connected to the
AUX jack, select "AUX".
16
FM AUX

Basic Operation

) button to turn the
iPod
CD
USB
FM
AUX
3
Play the source, and adjust the volume using
the VOLUME ( + / – ) buttons.
The volume can be adjusted from MIN (0) to MAX
(31).
Reinforcing the bass
You can reinforce the bass sound.
Press the S.BASS button.
To cancel the function, press the S.BASS button again.
< When the LOUDNESS function is set to on, the S.BASS
function is set to off automatically.
Loudness
You can increase the bass and treble sound effect at low
volume. Set this function to off when listening at normal
levels.
Press the LOUDNESS button.
To cancel the function, press the LOUDNESS button
again.
< When the S.BASS function is set to on, the LOUDNESS
function is set to off automatically.