Publicité
ANTI-TIP SAFETY HARDWARE INSTALLATION (cont.)
3) MOUNTING THE WALL-SIDE BRACKET:
Position the wall-side bracket along the
selected stud mark so that it will be
adjacent to the furniture-side bracket when
the furniture item is moved to its final
position. The wall-side bracket should be
about one inch lower than the
furniture-side bracket (Refer to zoomed-in
illustration). Use the two long screws to
secure the wall-side bracket to the wall.
Remember to position the wall- side
bracket vertically so that both screws will
engage the selected wall stud.
4) ATTACHING THE STRAP: When both
bracket are securely attached, move the
furniture to its final desired position and
thread the strap through the openings of
each bracket and also through the
ratcheting "buckle". Tighten the strap until
several clicks are heard. The furniture item
is now securely tethered to the wall (Refer
to Figue 1, 2, 3).
Note: If you must move the furniture item, you
can release the strap by depressing the
lever arm located at its buckle and
simultaneously with drawing the strap from
the buckle. Make sure to reconnect the
strap once the furniture item is returned to
its previous position.
FURNITURE
1
30
WALL
"Insert"
2
WALL
FURNITURE
FURNITURE
"Insert"
WALL
FURNITURE
FURNITURE
"Pull Down To Tighten"
3
www.dreamonme.com/help
WALL
WALL
Publicité
