Télécharger Imprimer la page

Publicité

Liens rapides

Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
FAMILY
For Customer Care: +1 (732) 366-1788
Dream On Me Brookside Toddler bed
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardwares.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
Notez s'il vous plaît que l'avertissement sur la table à langer
est exigé par la loi de la CPSC et l'ASTM, qui nous oblige d'in-
former les parents et les personnes en charge des enfants.
Nous nous excusons pour toute inconvenance que cela pour-
rait vous causer.
L'assemblage par un adulte de ce meuble est nécessaire.
Les petites pièces non-assemblées présentent le risque d'étouffement.
Pour vous aider pendant l'assemblage de votre produit, veuillez trouver
en bas des instructions simples, en étape. Avant de commencer
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS D'ASSEMBLAGE.
ITEM NO: 648
NUMÉRO DU MODÈLE : 648
1

Publicité

loading

Sommaire des Matières pour Dream On Me DOM FAMILY 648

  • Page 1 ITEM NO: 648 FAMILY For Customer Care: +1 (732) 366-1788 NUMÉRO DU MODÈLE : 648 Dream On Me Brookside Toddler bed Adult assembly required. Small parts may present choking hazard prior to assembly. Enclosed please find simple step-by-step instructions to help you quickly assemble your products.
  • Page 2 l'assemblage, les étapes suivantes sont vivement recommandées : 1. Lisez attentivement les instructions. 2. Identifiez toutes les pièces et les outils. 3. Vous avez besoin des outils suivants : Tournevis cruciforme Tournevis plat Marteau N'utilisez pas d'outils électriques. Pour protéger les pièces pendant l'assemblage, placez-les sur une surface souple.
  • Page 3 THE SCREWS AND NUTS REMAIN TIGHT. · NEVER USE THIS PRODUCT IF THERE ARE ANY LOOSE, MISSING FASTENERS, LOOSE JOINTS,BROKEN PARTS, OR TORN MESH/FABRIC.CONTACT DREAM ON ME 1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854 732-366-1788 FOR REPLACEMENT PARTS AND INSTRUCTIONAL LITERATURE IF NEEDED.
  • Page 4 • JOINTS SONT LÂCHES, SI DES PIÈCES SONT FAUTIVES OU SI LE TISSU PRÉSENTE DES DÉCHIRU- RES. POUR DES PIÈCES DE REMPLACEMENT ET DES INSTRUCTIONS D’ASSEMBLAGE, CONTAC- TEZ DREAM ON ME 1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854 732-366-1788.
  • Page 5 HARDWARE AND TOOL DIAGRAM DIAGRAMME D'OUTILS ET DE QUINCAILLERIE (b) Bolt 3” 10 PCS (c) Barrel Nut 14 PCS (a) Bolt 2- /8” 4 PCS (c) Écrou manchon 14 PCS (b) Boulon 3" 10 PCS (a) Boulon 2- /8" 4 PCS (f) Wood Dowel 2-3/8”...
  • Page 6 Note: don't tighten the bolts before finishing the last step. STEP# 1 Connect (D1) Right Side Bar & (E) Side Bar (D2)Left Side Bar& (E) Side Bar with (f) Wood Dowel. ÉTAPE 1 Connectez la (D1) barre latérale droite, les deux (E) barres latérales, et la (D2) barre latérale gauche, en utilisant des (f) goujons en bois.
  • Page 7 STEP# 3 Insert the cross bar (H&G) to the left side bar (D2&E) . then attach the split legs (F) to the cross middle bar(G) by bolts (a) and barrel nuts (c). ÉTAPE 3 (D2) STEP# 4 Insert the cross bar (H&G) to the right side bar (D1&E) .
  • Page 8 STEP# 5 Connect the Left Headboard leg (A1) and Right Headboard leg (A2) to the headboard (A) &Headboard Top Rail and Headboard Bottom Rail by using bolts( d ) and wood dowel ( k ). ÉTAPE 5 STEP# 6 Connect the Left Footboard leg (B1) and Right Footboard leg (B2) to the Footboard (B) by using bolts( d ) .
  • Page 9 STEP# 7 Connect headboard (A) to the left side bar (D2) using bolts (b) and Barrel Nuts(c). The right side bar (D1) use the same way. ÉTAPE 7 Connectez la tête de lit (A) à la barre latérale gauche (D2) en utilisant des boulons (b) et des écrous manchon (c). Connectez la barre latérale droite (D1) de la même façon.
  • Page 10 STEP# 9 1. Connect the upper bar of right bed rail (C1) to the headboard (A) by using bolts(e). Don't tighten the bolts now! Then connect the bottom bar to the heardboard by using bolts(b) and barrel nut (c). Then, Connect the right bed rail (C1) to the right side bar (D1) using bolt ( ).
  • Page 11 LIMITED WARRANTY workmanship and agrees to remedy any such defect. This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included. assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
  • Page 12 1532, S. Washington Avenue Piscataway, NJ 08854 E-mail: info@dreamonme.com Customer Care: +1 (732) 366-1788 www.dreamonme.com Follow us on @dreamonmeinc @dreamonmeinc to get your nursery featured on our social media. Enter our monthly giveaway! Chat with us! Simply scan the QRcode to register. For any questions or concerns or feedback.