KRESS Mission KR172E Notice Originale page 13

3. Remove the screws on the sheet metal.
Remove the sheet metal.
4. Press the latch and release the connectors
as the picture shown. Lift out the battery box
carefully.
NOTE: Do not pull by the cables. Hold the
connectors and release the latch.
5. Open the battery box then lift out the battery
carefully. Replace the old battery with the new
one.
6. Put the battery box back in its position and
plug the connectors. Refit the sheet metal.
7. Place the cover back in its position and
tighten the screws.
13
EN