Storage & Care - McCulloch MC1350 Mode D'emploi

PROPER STORAGE
Preparing your Portable Power Steam Cleaner for storage is quick and simple. When you have
finished your steaming tasks, follow the steps listed below.
1. Turn unit "Off" and unplug power cord.
2. Press and hold Steam Trigger to release all remaining steam.
3. Allow unit to completely cool (at least 30 minutes).
4. Remove all accessories from unit.
5. Carefully remove Water Tank Cap.
6. Drain any remaining water from Water Reservoir into a sink or tub – this will help to minimize
mineral build-up and prevent over-filling during your next use.
7. Wrap power cord around Cord wrap. Store Portable Power Steam Cleaner in a cool, dry loca-
tion.
MINERAL BUILD-UP
A common maintenance need for steam appliances is the removal of build-up caused by high
mineral content in many municipal water supplies. This mineral build-up may limit the effective-
ness and reduce the life of your Portable Power Steam Cleaner.
The best way to minimize mineral build-up is to use distilled or de-mineralized water when using
your Portable Power Steam Cleaner. If you are unable to use distilled water, it is recommended
that the following procedure be followed monthly to remove any mineral build-up:
1. Turn unit "Off" and unplug power cord.
2. Remove all accessories from unit.
3. Carefully remove Water Tank Cap.
4. Drain water from Water Reservoir into a sink or tub.
5. Slowly pour 8 oz of vinegar into Water Reservoir.
6. Replace Water Tank Cap, ensuring that it is screwed on tight.
7. Plug unit in, turn On and run unit until vinegar has been steamed out of the system.
8. Rinse Water Reservoir with fresh water, drain and repeat until vinegar odor dissipates.
Storage & Care
ENGLISH | 13