Filling Water Reservoir - McCulloch MC1350 Mode D'emploi

FILLING WATER RESERVOIR

1. Place Portable Power Steam Cleaner on a flat, level surface.
2. Lay unit on its back.
3. Make sure On/Off Switch is turned to "Off" and grounded power cord is unplugged from electri-
cal outlet.
NOTE: This unit features a continuous-fill Water Reservoir. It does not require any cool
down period before refilling.
4. Unscrew and remove Water Tank Cap.
5. Using the Fill Cup, fill the unit with 42 oz (1,242 ml) of water.
NOTE: In order to significantly reduce mineral build-up and prolong the life of your
Portable Power Steam Cleaner, use of distilled or de-mineralized water in the unit is
highly recommended. Refer to Page 13 for more information about mineral build-up.
6. Replace Water Tank Cap, ensuring that it is screwed on tightly.
7. Place unit back in upright position.
Using Your Portable Power Steam
Cleaner
ENGLISH | 11