Ptz Control; Ptz Settings - HIKVISION DS-9100HFI-ST Serie Guide D'opération Rapide

Guide d'Opération Rapide de DS-9100/9000/8100/8000HFI-ST Sé ries DVR
Record (manual record, schedule record, motion detection or alarm triggered record)
Alarm & Record

PTZ Control

Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before
you set the PTZ camera.
Before you start, please check that the PTZ and the DVR are connected properly through RS-485 interface.

PTZ Settings

To configure PTZ settings:
1. Enter the PTZ Settings interface.
Menu >Camera> PTZ
2. Choose the camera for PTZ setting next to Camera label.
3. Enter the parameters of the PTZ camera.
Note: All the parameters should be exactly the same as the PTZ camera parameters.
4. Click Copy if you want to configure same settings to other PTZ cameras.
5. Click the Apply button to save and exit the interface.
DS-9100/8100HFI-ST
DS-9000/8000HFI-ST
20