V1.0
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended
purpose.
2.
Do not use the tool if any parts are damaged, broken or misplaced.
Repair or replace the parts.
3.
Maintain a firm grip on the material and position your body and arms
to allow you to resist a kickback. Kickback can propel the material in
the direction of the cutting accessory's rotation.
3.1 Use a clamp to hold the material if the tool includes a clamping
system.
4.
Never use a tool with a cracked or worn grinding wheel. Change the
grinding wheel before using. Use only flanges supplied with the
grinder.
5.
Before using the tool on a workpiece, test the tool by running it at the
highest no-load speed for at least 60 seconds in a safe position. Stop
immediately if there is any abnormal vibration or wobbling that could
indicate poor installation of the grinding wheel. Check the tool to
determine the cause.
6.
Do not start the tool when the grinding wheel is touching the
workpiece.
7.
Clean dust and debris from beneath the grinding wheels frequently.
8.
Do not grind magnesium or aluminum, as a fire may result.
9.
Make sure the bench grinder is on a firm, level surface and properly
secured to avoid injury from unexpected movement. Firmly clamp or
bolt the bench grinder to a support surface to prevent slipping or sliding
during the operation.
10. Do not use a grinding wheel that vibrates when used. If dressing the
wheel does not solve the vibration, replace it. Also inspect the
machine for other causes of vibration such as worn bearings or a bent
shaft. Repair or replace broken components immediately before
reusing the machine.
11. Ensure the grinding wheel has a clean edge. Check the grinding wheel
for wear or chipping and replace if necessary.
Visit www.princessauto.com for more information
8 in. Belt Grinder Attachment
9082694
5