Installing The Humidistat - Honeywell Home HE360 Notice D'installation

8. You may cut the tubing to fit the connection length between the elbow fitting and switch. It is also
recommended to secure the hose to existing structures to avoid accidental disconnection.

Installing the Humidistat

1. Separate wallplate from humidistat.
CAUTION
Electrical Hazard
Can cause electrical shock or equipment damage. Disconnect power before beginning installation.
2. Mark the duct-tube hole. Hold the wallplate up to the desired location on the duct and make a mark inside
the duct tube hole.
INSIDE
OF DUCT
1
CONNECT TUBING TO + CONNECTION IF PRESSURE TAP IS
MOUNTED TO SUPPLY DUCT. CONNECT TO – IF PRESSURE
TAP IS MOUNTED TO RETURN DUCT.
Fig. 10. Install tubing.
1
PULL HERE
Replace Batt Replace Batt
Inside
Setting
%
%
HUMIDITY BOOST
Light System
Next Auto
M34565A
Fig. 11.
M34580A
Fig. 12.
9
HE360 HUMIDIFIER
M27304A
69-2629EF—11