Honeywell Home HE360 Notice D'installation page 10

HE360 HUMIDIFIER
3. Drill the duct-tube hole. Find your mark and drill a 1/2 in. hole in the duct. This is where the duct tube will
be inserted to capture air.
4. Insert the duct tube. Insert the duct tube through the wallplate before securing to the duct.
5. Secure the wallplate. Secure the wallplate to the duct with sheet metal screws (provided).
6. Run wires through the back plate. Run wires through the top or bottom channel on the back plate when
ductmounted. If installing like a thermostat on a wall, run the wires through the back.
69-2629EF—11
Fig. 13.
Fig. 14.
Fig. 15.
C
R
U
U
S
S
Fig. 16.
10
M34581C
M34671B
M34582B
RUN WIRES
THROUGH THE
TOP OR BOTTOM
CHANNEL
M34610B