Bercomac 700668 Feuille D'instructions page 2

Connect the ring terminal (size #8) (item 2 & 3) of the
wire assembly #106808 and #106809 on the switch
(item 1).
Protect the connections with electrical tape.
Connect male and female connectors (item 4 et 5)
together..
Drill a Ø1/2'' hole in the appropriate place in the
dashbord. Set the switch (item 1) into the hole and
secure it in place with the cap (item 2).
CAUTION
FOR YOUR SECURITY:
Read and follow the safety precautions for the
battery in the vehicle's manual.
Connect wire #106810 (red) to the positive post of the
battery and the wire #106809 (black) to the negative
post of the battery.
Caution: The wire #106810 contains a 20A fuse.
Always replace a fuse with the equivalent. Before
replacing the fuse, ensure that there is no damaged
parts.
Fi-700668 Fi-700668
Instructions sheet
M-11 M-11