Troubleshooting - cecotec BIGDRY 9000 PROFESSIONAL Manuel D'instructions

6. TROUBLESHOOTING

Problem
The unit does not work
The dehumidifying
function does not work
05608_05609_BigDry 9000 Professional / Professional Black_Manual_YV01200129.indd 23 05608_05609_BigDry 9000 Professional / Professional Black_Manual_YV01200129.indd 23
Possible cause
Has the power cord been
disconnected?
Is the tank full indicator
on? (The tank is full or not
installed properly)
Is the temperature of the
room above 35 º or below
5 º?
Is the filter clogged?
Is the intake duct
or discharge duct
obstructed?
BIGDRY 9000 PROFESSIONAL / PROFESSIONAL BLACK
ENGLISH
Solution
Plug the power cord into the
outlet.
Empty the water in the tank and
then reinstall the tank.
The protection device is activated
and the unit cannot operate.
Clean the filter as described in
this manual.
Remove the obstruction from the
discharge duct or intake duct.
23
29/1/20 18:14 29/1/20 18:14