cecotec BIGDRY 9000 PROFESSIONAL Manuel D'instructions page 21

6. Humidity cannot be adjusted in dry mode. The humidity level by default is 30 %.
Timer
1. Press the timer button to set the timer function.
2. When the device is switched on and in standby mode, press this button set the automatic
turn-on time, from 1 to 12 hours. The set time will be displayed and the device will turn on
after the selected time.
3. Press this button again to set the automatic turn-off time while the device is operating,
from 1 to 12 hours. The set time will be displayed and the device will turn off after the
selected time.
4. If the device is turned on or off manually, the automatic turn-on or turn-off will be
cancelled.
Safety system
In order to avoid risk of damage to the device:
The device will stop operating after every 30 minutes when it is operating in a room between
5 and 12 ºC.
The device will stop operating after every 45 minutes when it is operating in a room between
12 and 20 ºC.
Mode
Press the settings button to select the desired operating mode: Dehumidifying or Dry mode.
Draining collected water
When the water tank is full, the tank full indicator light will turn on, the device will stop
operating automatically and it will beep to alert the user that the tank's water needs to be
emptied.
How to empty the water tank:
Fig.5
Lightly press on the sides of the tank with both hands and pull the tank out gently.
Fig.6
Empty any water left in the tank.
Note: Do not remove the float from the water tank. The water-full sensor will no longer be able
to detect the water level correctly without the float and water may leak from the water tank.
Fig.7
05608_05609_BigDry 9000 Professional / Professional Black_Manual_YV01200129.indd 21 05608_05609_BigDry 9000 Professional / Professional Black_Manual_YV01200129.indd 21
BIGDRY 9000 PROFESSIONAL / PROFESSIONAL BLACK
ENGLISH
21
29/1/20 18:14 29/1/20 18:14