Important; Before Use; Height Adjustment - aidapt Strolley Instructions De Fixation Et D'entretien

INTRODUCTION
Thank you for deciding to purchase the Height Adjustable Trolley from Aidapt.
The Trolley is manufactured from the finest materials and components available. When used
correctly it is designed to give many years of reliable trouble-free service.

IMPORTANT!

N.B. This equipment must be installed by a competent person.
Please Note: Always consult with the prescriber/Physiotherapist if you are in any doubt
that this product is suitable for your use.
VG799 Height Adjustable Strolley Trolley
VG800 Height Adjustable Wingmore Trolley
VG801 Height Adjustable Meopham Trolley
Maximum Weight on Tray: 15 kg
Do not exceed the weight limit stated – doing so could put the user at risk.

BEFORE USE

Carefully remove all packaging. Avoid using any knives or other sharp instruments as this
may damage the surface of the item.
Check the product for any visible damage If you see any damage or suspect a fault, do not
use your product, but contact your supplier for support.

HEIGHT ADJUSTMENT

Your trolley can be adjusted in height if required.
To adjust the height remove the lower 'E' clips from the extension legs and pull
•
each leg to the desired height. (See fig. 1.)
Ensure that all four extension legs are evenly adjusted.
•
Re-insert all 'E' clips facing the line of travel also ensuring that the 'E' clips have
•
passed through the product frame and extension leg and are secure. (See fig 2.)
Never adjust the legs unevenly; this is dangerous and can seriously compromise
•
the safety of the user.
Check that the trolley is sitting evenly on the floor and there is no excessive rocking or the
trolley is tilting to one side. If this is the case, please do not use the trolley, but repeat the
above steps to correct the problem or contact your supplier for service support.
Usage and Maintenance Instructions
2
Ver. 3 07/2012 (994)