Publicité
STEP 4
4.
Insert the dowels in the top edge of the Sides into the holes in the Top (1). Fasten in
place with 4 x 35mm Phillips Pan Head Screws (F) through the holes in the side cleats.
STEP 5
E
5.
Place the Backs (2) on back of the unit with the Back Channel (12) between them. Fasten
in place with 3 x 16mm Phillips Screws (E) through the predrilled holes in the backs.
x10
597KFDW1 – Page 5
Publicité
