KingSlim D1 Dual Manuel D'utilisation page 10

EN
Position 2: Install the rear camera near the license plate. Position 2 is highly
recommended. The rear image is crisp and clear for both rear viewing and as a
back-up camera.
Note:
① Pay attention to the connector position when connecting the rear camera with
the extension cable; please refer to the photo below.
② Clean the area to ensure the optimum adhesion before installing the rear
camera.
③ If you choose position 1, clean the rear windshield regularly to ensure the image
quality.
④ If you choose position 2, install the rear camera with the included adhesive
stickers or screws.
8. Use the pry tool to hide the cables.
8