Operating Elements; Start-Up Operation; Automatic Shut-Off - NATURE & DECOUVERTES 15210900 Manuel D'instructions

• This appliance can be used by children aged from 8 years and above and person with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with
appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Please ensure that children do not use the device as a toy.
• Examine the appliance frequently for signs of wear or damage. If there are such signs or if the appliance has
been misused, return it to the supplier prior to any further uses.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or smiliarly qualified
persons in order to avoid a hazard.
• Disconnect the device from the power network prior to cleaning it. During cleaning, ensure that no liquids come
into contact with the switch and buttons and that the device is used only in an absolutely dry condition.
• Do not insert any needles or pointy objects into the device.
WARNINGS
• Please consult a physician prior to using the device if you suffer from an illness (e.g. varicose veins, thrombosis,
etc.)
• Never use the device with open wounds, burns, hematoma, swellings, or similar conditions.
• Stop treatment if it feels uncomfortable to you. Heat-sensitive persons in particular should use the device with
care and stop the treatment in a timely manner.
• Never use the heat device on animals.
• When the device is likely to be used for an extended period the controls should be adjusted to the recommended
setting for continuous use.
ATTENTION
• In order to ensure the proper functionality of the operating element (thermostat), do not place it on top of or
underneath the device.
• Never use the heat device if it is folded wrinkled, or pushed together.
8

OPERATING ELEMENTS

A: digital display screen
B: timer
C: temperature
D: ON/OFF
1. To operate the heating blanket, insert the plug into the mains power supply and switch on the
socket, the digital display screen will show "
heating blanket is connected into the power supply if the red dot will still light up.
2. Press the button "D" to switch on the blanket, and then press the button "B" to select your
desired timing from 1 to 9 hours, the selected timing number will flash on the display screen five
times, after that, the system will confirm your selection, the heating blanket will automatically
switch off after the selected timing,
3. Press the button "C" to select your desired temperature from level 1,2,3,4,5,6,7,8,9 to level H.
4. The heating blanket will be programmed to work under the default setting 3 hours timer
and the 4th heating level when the power is on.
5. Repress the button "D" to restart the heating blanket, the heating level 1,2,3 and 4 will be
suitable for continuous use.

START-UP OPERATION

Note: Ensure that the heated blanket is not pinched.
Connect the connector to the plug of the heated blanket. Ensure that
the connection is done properly and the plug fits tightly. In order to
switch the heated blanket on, insert the plug into the power outlet
and switch the device on.
Use only original parts. Do not attach any other control unit!
Attention
Please ensure that the heated blanket covers the object loosely i.e. that some air circulates
between the heated blanket and your skin during use. Accumulation of heat must be prevented.

AUTOMATIC SHUT-OFF

The electric heated blankets shuts off automatically after the selected timing
This saves energy and grants additional safety in that the heated blankets is never in operation
without supervision.
After use please disconnect the power plug from the power outlet.
A
B C
D
"and after 1 second the " "will disappear and the
9