GE Profile BATTEUR INTELLIGENT Guide De Démarrage Rapide page 3

Getting Started
Before you begin, note the Rev/Zero and Scale/
Timer buttons are one single button with two
functions that should be pressed in the middle.
2 Lower the bowl support by pressing down on the lift arms.
3 Place the bowl into the bowl arms and align on pins. Push the bowl backward and down to lock the
bowl. Insert your desired attachment. Push attachment upward into the attachment output shaft until
a click is heard and the attachment is held firmly in place. This may require a slight turn to lock into
place.
Rev / Zero
Scale / Timer
1
off.
Push upward
(may require turn
slightly to lock).