Getting Started - GE Profile BATTEUR INTELLIGENT Guide De Démarrage Rapide

Getting Started

Control
NOTE: If your smart mixer is plugged in and not turned on, press any button to wake up the
machine.
Scale
amount of ingredients in grams/lb/kg/oz.
The direct weight can be taken in the mixer
bowl or in any container on the base of the
smart mixer.
To start, in the mixing OFF position, press the
Scale/Timer Button. The light bar will show
yellow.
weighing your ingredients.
Then the screen will read the weight.
Example: "200g"
To Zero the scale feature, press the Rev/Zero
button. The smart mixer screen will show
"----" while it is setting to zero. Then "0g" will
show on the screen when it is complete. If the
screen does not show zero, press the Rev/
shows zero before weighing your ingredients.
Use the toggle arrows when using the scale
to change the scale's units.
Timer
Press the Timer button to initiate the Timer
Rev / Zero
Scale / Timer
Screen
Speed
Dial
Stir 2 4 6 8
Connected position
then switch to 00:00. The light bar will show
blue. Use the left and right arrows to set the
timer to your desired mix time.
Press the center button to start the timer.
To cancel the timer when the unit is not
mixing, rotate the speed dial to any position
on the right and back quickly.
NOTE: The Timer increases at 15 second
increments with a single press. Press and
hold the Scale/Timer button to increase by 1
minute increments.
After starting the timer, turn the speed dial to
the timer ends for extra convenience and
perfectly executed recipes.
NOTE: Time can be added while the timer is
running.
Over-the-air (OTA) updates
With over-the-air updates, you get new fea-
tures like Auto Sense and Guided Recipes as
keeps getting better with time.
10 11