Urmet 1093/831 Guide Rapide page 4

ENGLISH
Long Transmission Distance Standard PoE Switch
◆ Can supply power to network surveillance cameras that without PoE
function
◆ 9x 10/100Mbps auto-sensing RJ45 ports: 8x 10/100Mbps PoE ports, 1x
uplink port
◆ Supports port auto-flip (Auto MDI/ MDIX)
◆ External power supply
◆ Maximum PoE ports power: 110W (Port 1 to Port 8)
◆ Maximum power of single PoE port: 30W
◆ Adopts store-and-forward architecture
◆ IEEE 802.3af/at
◆ Features with fanless, natural cooling, small, compact and quiet design,
suitable for desktop or wall
Description
This switch provides a network point for power supply and data transmission.
All the 9 Ethernet ports can be connected with 10/100Mps quickly, and the
uplink port is Ethernet interface, among which 1-8 ports can provide standard
IEEE 802.3af/at power supply. Due the advanced self-sensing algorithm
supply power for IEEE802af/at terminal unit, there is no need to worry about
damaging proprietary PoE or non-PoE standard equipment. In addition, it will
stop power supply when PoE devices are not connected. In short, The
1093/831 features simple and reliable design, automatic identification PoE
requirements, duplex and high-speed.
The 1093/831 provide network layout need to simplify IP-based surveillance
cameras network cameras in order to install in commercial network and home
network. The devices far away from power socket are very suitable for
hanging on the wall or ceiling. PoE eliminates the need for connecting these
devices to power socket. So it make more flexible for those difficult to connect
with AC power socket, and cut down the installation cost.
4
DS1093-581A