Kickstand; Bicycle Rack - Schindelhauer Bikes Arthur 2020 Notice D'utilisation

5.5 Kickstand

With the included adapter plate, a kickstand can be mounted to
your Arthur eBike. You'll find a list of compatible kickstands at
www.schindelhauerbikes.com.
Please consider the specification from the manufacturer
i
regarding the maximum load of the kickstand. Exceeding
the maximum load can result in breaking the kickstand
and possibly damaging your eBike.
Fold in the kickstand before moving your e-bike. Pushing
!
the e-bike backwards with a folded-out kickstand can lead
to jamming the kickstand on the crank arm and damage
the kickstand and its frame mount.
Never sit down on the e-bike with a folded-out kickstand
as it might break it or damage the kickstand's frame
mount.
Never ride with a folded-out kickstand!
Danger of accident!

5.6 Bicycle rack

A bicycle rack can be mounted to your eBike Frame. You'll find a list of
compatible bicycle racks at www.schindelhauerbikes.com.
Please take care that the carried luggage does not obscure
the LEDs of the LightSKIN seat post, as otherwise it will no
longer be visible to other road users.
Danger of accident!
Please note the information provided by the luggage
i
carrier manufacturer regarding the maximum load. If
this is exceeded, the luggage rack may break and may
damage your e-bike.
Please note that the stopping distance may increase when
the e-bike is loaded. Do a test stop to familiarise with the
conditions.
Danger of accident!
Note the following before you start the ride:
• The load must be secured in all directions and must not move.
• Strictly avoid parts of the load to reaching through the front rack as
they can get caught in the front light or the front wheel. Danger of
accident!
• The balance point of the load must be positioned in the centre of the
front rack.
• The mounting of a handlebar bag is not allowed as it would hide the
front light.
EN
67