GENUINE F935P3 Instructions Importantes page 11

1. F8377101 Couplings
2. Basket Shaft
NOTE: For *C50 and *C60, use the .5625 (9/16)
inch thread side of each F8377101 Couplings to
attach to the trunnion bolt.
17. For *C18-*C40: thread four (4) of the Threaded Rods into the
other end of the four (4) F8377102 Couplings. For *C50 and
*C60: thread all six (6) of the Threaded Rods into the
F8377101 Couplings. Refer to Figure 10 .
*C18-*C40 Models
1. F8378901 Threaded Rods
2. F8377102 Couplings [*C18-*C40] or F8377101 Couplings
[*C50-*C60]
3. Basket Shaft
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Figure 9
Figure 10
18. Mount the F8378601 Push Out Plate onto the Threaded Rods.
Refer to Figure 11 .
F8378601 Push Out Plate Patterns
1. *C18-*C30 Models
2. *C40 Models
3. *C50-*C60 Models
19. Remove the large threaded rod from the arm support on the
Basket Puller Tool and re-thread the rod through the flat side.
Refer to Figure 12 .
11
Figure 11
Form No. 5-10-92ENR6