Dubbing - Yamaha K-902 Mode D'emploi

You can make dubbing from DECK A to DECK B. Open the cassette compartments by pressing the EJECT buttons and load a
blank cassette tape in DECK B and the original cassette tape in DECK A.
Display during dubbing
1
1
Set the MODE selector to
or position.
Setting the MODE selector to
or
RELAY
position results in the same
function as .
MODE
"/[/"/
RELAY
To stop dubbing
Press the STOP button. (If you press the STOP button on
DECK B, both decks stop simultaneously and the dubbing
mode is cancelled. If you press the STOP button on DECK
A, DECK A stops immediately and then DECK B stops after
recording a 4-second blank section.)
When the tape in DECK B reaches its end, DECK B and
DECK A stop at the same time.
When the tape in DECK A reaches its end, DECK A stops
and DECK B stops after providing a blank section of about 4
seconds.
Available operations while dubbing
The Rec Return function can be carried out on DECK B.
Refer to "REC RETURN operation" on the previous page.
DUBBING (From DECK A to DECK B)
¤ ‹
A
REC DUB
L
– 30 dB 20 15 10
R
NATURAL SOUND STEREO DOUBLE CASSETTE DECK K-902
DIRECTION
!
DECK A
PLAYBACK
MUTE/SEARCH
POWER
MODE DOLBY NR
EJECT
O / p / ∏ / RELAY OFF/ B/ C
2
Set the
DIRECTION
buttons for
DECKs A and B.
DIRECTION
Lights during dubbing.
NORM or HIGH indicator lights during dubbing.
¤ ‹
RELAY
B
NORM HIGH B C REC
8 6 4 2 0
RESET RESET DIRECTION
PLAY ⁄ ! PLAY ⁄
RECORD/PLAYBACK
STOP MUTE/SEARCH STOP REC/PAUSE
DUBBING A # B
EJECT
NORMAL HIGH
3
Set the DUBBING speed to either
NORMAL (normal speed) or HIGH (twice
the normal speed) with the DUBBING
buttons*. Dubbing starts automatically.
DUBBING A # B
NORMAL HIGH
* Higher quality sound will be obtained with the
NORMAL setting.
Note
During dubbing, the Dolby NR is automatically set to OFF
and the recorded tape can be dubbed as it is. (When the
tape to be dubbed is recorded with Dolby NR, this effect is
also dubbed.)
Synchronized recording function
When operating this unit in combination with the
YAMAHA CD Player which has SYNCHRO button on its
remote control transmitter, CD Synchronized recording
function can be utilized. This function is operated with
the remote control transmitter of the CD Player.
(Regarding the operation, refer to the manual of the CD
Player.)
2 4 6 +
2
DECK B
REC LEVEL PHONES
5
4 6
3 7
2 8
1 9 3
0 10
The corresponding NORM
or HIGH indicator lights on
the display.
13