Jean Louis David Infinite Styler Mode D'emploi page 12

Trimming neckline and ear area
— WARNING! Be aware that the trimming blades are very sharp, and remove any hair they come into
contact with when the cut comb is removed.
— Position the appliance so that only one edge contacts the hair.
— Slowly shape the hair around the ears and trim the neckline by positioning the trimming blades against the
neck and moving downwards. For final trimming, use suitable scissors (not included).
— After the operation, press the on/off button to switch off the appliance.
Trimming the hair of nostrils and ears
— Press the on/off button to switch on the appliance.
— Place the trimming tips against the protruding hair of the nostrils / ears.
— Always use a slow and controlled movement.
— Only use the trimming tips to remove hair from the mentioned areas. Do not insert the trimming tips more
than 5 mm into the nostrils / ears.
— After the operation, press the on/off button to switch off the appliance.
— Before cleaning, ensure the appliance is unplugged from the charging adapter, and then switch off the
appliance and let it cool down completely.
— Do not clean the appliance and charging adapter with steel wool, strong chemicals, alkali, abrasive or
disinfecting agents as they may damage their surface.
— Do not immerse the appliance and charging adapter in water or other liquids to clean them. Make sure that
the electrical parts do not become wet or damp.
— Detach the cut comb from the trimming head after each use.
— Remove any hair left on the appliance and trimming head. Use the cleaning brush if necessary.
— Detach the trimming head from the appliance if required; do not immerse the trimming head in water or
other liquids to clean it. Clean the trimming head and inside with a dry soft cloth or the included cleaning
brush. Refit the trimming head onto the appliance afterward and ensure it is engaged properly in place
before using the appliance again.
— Oil the trimming blades and trimming tips with the lubrication oil (included) once every few cuts.
— Clean the cut comb with clean water and dry it afterward. Ensure the cut comb is completely dry before
attaching it to the trimming head and using the appliance again.
— Clean the appliance and charging adapter with a soft damp cloth and, if necessary, a little mild detergent.
Wipe with a dry soft cloth.
— The appliance and charging adapter may only be used again after they are dried completely.
— Before storage, always make sure that the appliance and charging adapter are completely dry and cooled
down.
— Store the appliance and charging adapter in a cool, dry place, protected from moisture and out of the reach
of children.
This symbol, displayed on the product or on its packaging, indicates that this product complies with
the European Directive 2012/19/EU and must not be disposed of with household waste.
It must be taken to an appropriate collection point for recycling electrical and electronic equipment.
By ensuring that this product is disposed of in an appropriate way, you will be helping to prevent potential
harmful consequences for the environment and human health.
Recycling materials will help to conserve natural resources.
CLEANING
STORAGE
12