Before Using The Appliance; Product Overview - Jean Louis David Infinite Styler Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
WARNING! Check the delivery contents for any missing items or any possible transport damage. If the
appliance is damaged or some parts are missing, do not use it and bring it back to your dealer.
1
2
3
4
5
6
— Using the appliance with damaged cut comb or attachment may cause personal injury. Before each use,
ensure the trimming tips and trimming blades are properly oiled, if necessary, and free of damage.
— During the operation, shake or blow off the hair from the cut comb and attachment, if too much hair is
caught in them.
— Always switch off the appliance before attaching / removing the cut comb or replacing the attachment.
— For hygiene reasons, this appliance shall be used by one person only.
— It is not recommended to operate the appliance while charging the battery, if it is connected to the charging
adapter / power supply, to avoid the battery from overheating and extending charging time.
— The on/off button will be locked by keeping it pressed for 3 seconds (at the same time the white power
indicator flashes 3 times); the appliance does not operate (the on/off button is locked) while the on/off
button is pressed, unless keep pressing the on/off button again for 3 seconds to unlock it.
Charging the battery
— Before using the appliance for the first time, charge the appliance / battery for approx. 2 hours.
— After the battery is fully charged, the appliance can be operated continuously for approx. 60 minutes.
— Press the on/off button to switch off the appliance.
— Connect the charging adapter with the charging jack on the appliance and plug it into a suitable power
socket.
— The power indicator lights up constantly white during charging.
— After the battery is fully charged, the power indicator flashes white.
— Disconnect the charging adapter from the appliance and the power supply.

BEFORE USING THE APPLIANCE

PRODUCT OVERVIEW

7
8
12
11
INSTRUCTIONS FOR USE
1.
Trimming blades
2. Trimming head (for hair, beards
9
and moustaches)
3. On/off button
10
4. Battery (built-in)
5. Power indicator
13
6. Charging jack
7. Trimming tips
8. Trimming head (for nostril and
ear hair)
9. Cut comb
10. Cutting-length adjustment
wheel (1 – 10 mm)
11. Lubrication oil
12. Cleaning brush
13. Charging adapter
10

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Jld-2104

Table des Matières