Appliance Identification - Parkair Energy Solutions PRK-MCW-9S Manuel D'utilisation Et Installation

2-3 APPLIANCE IDENTIFICATION

PRODUCT NAME
MODEL
CODE
POWER SUPPLY
FREQUENCY
WEIGHT
TYPE OF GAS
CHARGE OF GAS
TYPE OF CLIMATE AREA
LEVEL OF MOISTURE PROTECTION
TYPE OF ISOLATION
CAPACITY
NOMINAL ABSORPTION
MAX ABSORPTION
NOISE LEVEL
WORKING PRESSURE
REFERENCE OF GWP
ADDRESS OF PRODUCER
GOODS ORIGIN
2-4 CONSTRUCTION DESCRIPTION
•
The structure is made of galvanized sheet
epoxy painted. The removable panels are
soundproofed by means of a sound-absorbing
plate.
•
The compressor is mounted on rubber
supports or springs to eliminate the vibrations
transmitted to the frame.
•
The exchangers are of the AISI 316 steel plate
type, and covered with anti-condensation pad,
equipped with antifreeze protection control (in
heat pump models).
•
The electrical panel (execution according to
EN60204-1) is made of galvanized sheet and
placed on the front of
38
the machne, easily accessible from the front
inspectionpanel.
•
The refrigerant circuit is made entirely of copper
and insulated where necessary with closed cell
expanded tube; the joints are braze welded
with high resistance alloy.
•
All models are
programmable electronic control unit, which
regulates all the functions of the appliance,
signaling any type of safety intervention on a
luminous display of indoor unit.
LABEL RELEASE
WARNINGS
controlled by a new