Using The Lighton Cradle; Preparing A Mobile Phone For Use; Light Panels - Dreamzon Lighton Manuel D'utilisation

EN

Using the LightOn Cradle

Preparing a Mobile Phone for Use

To use the LightOn cradle:
1. Place the mobile phone on vibrate mode. If a phone has
multiple vibration modes, select the mode that uses the
strongest and longest vibration time.
2. Gently place phone in cradle.
Note: If the phone is not placed gently, the movement
may register as a vibration, causing the phone to light
up. If this happens, press the Reset button.

Light Panels

When the mobile phone on the LightOn cradle receives an
SMS or phone call, a blue LED light begins flashing brightly
in the front and back panels.
For the first two minutes after a call comes in, the light
flashes rapidly. After two minutes, the frequency of the
flashing decreases, conserving battery power, until it
totally disappears.
10