Service Centre - RAWLINK 36101 Manuel D'instructions

Attaching the ball coupling
Screw the holder and bracket with the ball
securely to the saddle post clasp using a bolt,
washer and nut.
Attach the bike trailer's coupling to the ball
and lock it tight.
NB! It may be necessary to change to the
saddle post clasp or bolt, depending on the
bike type and model.
16

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• Open weekdays from 8.00 to 16.00
(Fridays until 15.30)
• E-mail: service@hpschou.com
Manufactured in P.R.C.
Manufacturer:
HP Schou A/S
Nordager 31
DK-6000 Kolding
© 2017 HP Schou A/S
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from HP
Schou A/S.