BOLERO DRESSCODE 7200 INVERTER Manuel D'instructions page 69

ENGLISH
Do not wash only one piece of clothes or garment, as these could cause great unbalance.
Always introduce at least 3 or 4 clothes so that draining can be done smoothly.
5. CLEANING AND MAINTENANCE
Warning: Before cleaning or maintaining, unplug the appliance and close the tap.
Proper maintenance on the washing machine can extend its working life. The surface can be
cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water
overflow, use a cloth to wipe it off immediately.
Fig. 25.
Do not use abrasive cleaners or scouring pads.
Cleaning the drum
The rusts left inside the drum by the metal articles shall be removed immediately with
chlorine-free detergents.
Do not use steel wool.
Note: Do not put laundry in the washing machine during the drum cleaning.
Cleaning the door seals and glass
Wipe the glass and seal after each wash to remove lint and stains. If lint builds up it can
cause leaks.
Remove any coins, buttons and other objects from the seal after each wash.
Fig. 26.
Cleaning the inlet filter
Note: The inlet filter must be cleaned when there is little water.
Washing the filter in the tap
Fig. 27.
Close the tap.
Remove the water supply hose from the tap.
Clean the filter.
Reconnect the water supply hose.
Washing the filter in the washing machine
Fig. 28.
Screw off the inlet hose from the backside of the machine.
Pull out the filter with long nose pliers and reinstall it back after being washed.
Use the brush to clean the filter.
Reconnect the inlet hose.
69
DRESSCODE 7200 / 8200 / 9200 / 10200 INVERTER
DRESSCODE 7200 / 8200 / 9200 / 10200 INVERTER STEEL