Before Use; Intended Use - aidapt VM972 Manuel D'instructions

INTRODUCTION
Thank you for deciding to purchase the Foot Cleaner with Pumice from Aidapt. The
Foot Cleaner is manufactured from the finest materials available. When used
correctly it is designed to give many years of reliable, trouble-free service.

BEFORE USE

Carefully remove all packaging. Avoid using any knives or other sharp instruments
as this may damage the product.
Please examine your product for any visible damage before using/installing. If you
see any damage or suspect a fault, please do not use, but contact your supplier.

INTENDED USE

The Foot Cleaner with Pumice is ideal for people who have limited mobility,
enabling users to easily clean their feet without bending. The suction caps on its
underside help to keep it safely secured to the bath during use. It can be used with
any type of liquid soap and the centre pumice gently exfoliates and removes hard
skin on your feet.
INSTRUCTIONS FOR USE
We recommend that you use the Foot Cleaner in the bath or shower, after the feet
have been well soaked, for best results.
NB. Ensure that you are balanced by holding onto a secure, fixed rail or
surface, if necessary, during use.
Ensure the surface you intend to use the Foot Cleaner on is free from oily
•
residue, which can prevent the suction cup from gripping.
Position the Foot Cleaner and push down a little until the suction cups
•
have gripped the surface.
Raise one foot and move it over the brush or pumice as required. Swap
•
and repeat with the other foot.
CLEANING
Clean your Foot Cleaner using a non-abrasive cleaner or mild detergent with a soft
cloth. Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads may damage the
product beyond repair and should not be used. Always ensure that you wipe dry
the equipment after cleaning.
Usage and Maintenance Instructions
2
Ver. 2 06/ 2012 (2155)