Before Use; Intended Use - aidapt VM961 Notice D'utilisation Et D'entretien

Stylo
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INTRODUCTION
Thank you for deciding to purchase the Light Touch Pen from Aidapt. The Light
Touch Pen is manufactured from the finest materials available. When used correctly
it is designed to give many years of reliable, trouble-free service.

BEFORE USE

Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.

INTENDED USE

The Light Touch Pen is a large, comfortable writing aid for those who have trouble
gripping. The Light Touch Pen is popular with users who suffer from arthritis, who
often find gripping a normal pen for writing to be difficult or painful.
INSTRUCTIONS FOR USE
Use the Light Touch Pen exactly as you would a standard ball point pen.
Remember to replace the cap after use to extend the life of the pen.
Refills may be available at a stationers or similar supplier, depending on
your location.
CLEANING
Clean your Light Touch Pen using a non-abrasive cleaner or mild detergent with a
soft cloth. Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads may damage
the product beyond repair and should not be used. Always ensure that you wipe
dry the equipment after cleaning.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all
components for their safety.
If in any doubt, please do not issue or use, but immediately contact your
supplier for service support.
Usage and Maintenance Instructions
2
Ver. 2 08/2012 (2153)

Publicité

Table des Matières
loading

Table des Matières