Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation
Placement
1.
The Electric Fireplace does not
require any special venting. Make
sure there is clearance for air
circulation beneath the unit and at
least 1/2" behind it.
CAUTION: Do not install the fireplace
directly on carpet or similar surfaces
which may restrict air flow.
2.
Install the unit in an opening with the
following minimum dimensions:
Model XHD28
A
27" (686 mm) wide
B
23-1/8" (587 mm) high
C
8" (203 mm) deep
Model XHD26
A
24-3/8" (619 mm) wide
B
18-1/2" (470 mm) high
C
8" (203 mm) deep
Model XHD23
A
21-1/2" (548 mm) wide
B
20" (508 mm) high
C
8" (203 mm) deep
3.
If installing the unit in an existing
fireplace opening, seal all drafts and
vents with a non-fibrous insulation
material to prevent any chimney
debris from falling onto the unit. Do
not install into an existing fireplace
opening that is prone to dampness.
B
C
A
7
Publicité
Table des Matières
