Get Started - defunc TRUE GAMING Mode D'emploi

GENERAL TIPS FOR TRUE WIRELESS EARBUDS
• Because of interference with other Bluetooth devices, the earbuds
can get disconnected from each other. If you experience this
problem, place the earbuds in the charging case and close the cap.
After a few seconds, open the cap and start using the earbuds again.
• Hold the earbud stem when putting or adjusting the earbuds in
your ears. This way you avoid touching the sensitive touch area
which control different functions.
• The volume effects the capacity of the battery. If you play your music
with lower volume, you will increase battery life.

GET STARTED

1. Make sure the earbuds are fully charged. Do this by charging the
earbuds in the charging case until the 4 blue lights on the charging
case are lit.
2. Open the charging case, take out the earbuds. The earbuds will
automatically power on and pair with each other.
3. When the blue light on either earbud is blinking, the earbuds are
ready to pair with your device.
4. Turn on the Bluetooth function on your device and select
Defunc TRUE GAMING in the list to pair earbuds with the device.
POWER ON
There are two ways to turn the earbuds on:
1. Open the cap of the charging case and take the earbuds out for
auto-power on.
2. Touch the left and right earbuds for 3 seconds to turn them on.
5